Raymarine St60 Wind Service Manual
Help required to diagnose problem with ST60 Close Hauled Wind Instrument.
Symptoms. Wind direction working properly. Wind speed showing zero. I've replaced PCB in masthead unit and these are my voltage readings to earth. Yellow (wind) 8V, spec is 0 to 5V. Other wires to spec. Disconnecting yellow from instrument head gives a very low masthead unit output voltage, circa 0.1V variable in 10Kn wind. The open circuit yellow on instrument is just over 8V.
I have swapped the master instrument head with the slave instrument and had identical results prior to replacing the masthead PCB. Is it possible that the original masthead unit blew both instrument heads prior to its replacement?
Symptoms. Wind direction working properly. Wind speed showing zero. I've replaced PCB in masthead unit and these are my voltage readings to earth. Yellow (wind) 8V, spec is 0 to 5V. Other wires to spec. Disconnecting yellow from instrument head gives a very low masthead unit output voltage, circa 0.1V variable in 10Kn wind. The open circuit yellow on instrument is just over 8V.
I have swapped the master instrument head with the slave instrument and had identical results prior to replacing the masthead PCB. Is it possible that the original masthead unit blew both instrument heads prior to its replacement?
Raymarine St60 Wind Vane
Microsoft 3d chess free download. The following documents are available for Raymarine marine electronics: manuals, mounting templates, 2D/3D models (CAD drawings) and Declaration of Conformity certificates. Find a manual for a specific product variant from Raymarine. Raymarine ST50, ST60, and ST50+ masthead instruments. Power is supplied by a 9 volt battery. There are 4 LED’s to indicate the condition of the various circuits in the wind instrument. Power is controlled with an On/Off switch. To conserve the battery, the switch should be left off when not actually doing testing. Virtual nanolab 2016 cracked. Old style masthead wind.
